Calibration Slide

Please login to view prices
Category:

Description

Calibration slides are provided for easy collection of the light emission profiles of tapered fibers. Calibration slides consist of a specified tapered fiber stub attached on a microscope slide. The surface of the slide close to the fiber is covered with hydrophobic material to help formation of the droplet of fluorophore solution.

 

Specs

Fiber type (Numerical Aperture / core diameter)

0.22NA / 105µm

0.39NA / 200µm

0.66NA / 200µm

Active length * (mm)

0.5; 1; 1.5

0.5; 1; 1.5; 2; 2.5; 3

0.5; 1; 1.5; 2; 2.5; 3

Implant length (mm)

Any value in steps of 0.5mm

max 50mm

Connector:

cLCF – Φ1.25mm, 6.4mm long ceramic ferrule

sLCF – Φ1.25mm, 6.4mm long ceramic ferrule with slot

mLCF – Φ1.25mm, 6.4mm long metal ferrule

cFCF – Φ2.5mm, 10.5mm long ceramic ferrule

mFCF – Φ2.5mm, 12.7mm long metal ferrule

NA

NA

 

*Nominal active length values refer to the whole-taper operation of Lambda fibers and are valid for blue (450 – 480nm) light emission and green (500 – 550nm) fluorescence collection. They only applies if the numerical aperture of the light launch/collection optical system matches the numerical apertures of the fiber stub and when using patch cords with the same specifications of the fiber stubs (both NA and core size).

You may also like…